Uberhaus 72255106 - Page 14

Page 14
Step 8
G
C1
F
D1
D
J1
J
G1
F1
P1
V
×2
V
V
P1
V
×2
P1
×2
V
V
8.1. Attach a Connector (P1) to each end of the Lintels (F1 & F) and (G & G1) and to the end of the
Rails (D /D1) with the Screws (V).
8.2. Put the Roof Holder Bars (J & J1) onto the Connectors (P1) which are installed at the ends of the
Lintels (G & G1). Attach with screw (V).
8.3. Attach the Roof Holder Bars (J & J1) by passing Screws (V) through the holes on the top of
Connectors (P1).