FAN OPERATION
Plug into any AC 120V, 60Hz source, and ensure that the plug and the socket fits well.
The fan is equipped with a 4-position speed control switch.
Speed control switch:
SYMBOL FUNCTION
0 Power off
1 Low speed
2 Medium speed
3 High speed
TILT
This will provide steady breeze distribution. To tilt the fan head so that the breeze is
targeted at an angle, carefully tilt the head of the fan until it reaches the desired angle.
CLEANING AND STORAGE
·Unplug the fan before cleaning.
·Use only a soft, damp cloth to gently wipe the outer surfaces of the fan clean.
·To clean between the grilles, we recommend using a pipe cleaner, flexible duster,
vacuum cleaner or compressed air to gently remove the dust.
·DO NOT immerse the fan in water and never allow water come in contact with the
motor housing.
·DO NOT use gasoline, paint thinner or other harsh chemicals to clean the fan.
·For storage, you may leave the fan assembled and covered to protect it from dust.
Store the fan in a cool, dry place out of reach of children.
WARNING!
DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD
VOID THE WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
To Next Page
Loading...
