FSQQ-B 3
13
、
Place the fan on a dry level surface.
14
、
Do not hang or mount fan on a wall or ceiling.
15
、
Do not operate if the fan housing is damaged.
16
、
A loose fit between the AC outlet (receptacle) and plug may cause overheating
and a distortion of the plug. Contact a qualified electrician to replace loose or worn
outlet.
WARNING:
1. To reduce the risk of fire or electric shock, do not use this fan
with any solid-state speed control device.
2. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
SAVE THESE INSTRUCTIONS
FAN OPERATION
Plug into any AC 120V, 60Hz source, insure that the plug and the socket fit well.
The unit is consisted of two unattached fan and each equipped with a 4-position
speed control switch.
Speed control switch:
SYMBOL FUNCTION
0 OFF
1 Low speed
2 Medium speed
3 High speed
To Next Page
Loading...
