Ubiquiti ETH-SP-G2 User Manual

ETH-SP-G2 Quick Start Guide
https://dl.ubnt.com/qsg/ETH-SP-G2/ETH-SP-G2_EN.html[1/20/2020 4:04:01 PM]
ETH-SP-G2 M5 Self-Tapping Screw M5 Serrated Washer
ETH IN/OUT Port
Grounding Point
Package Contents
Hardware Overview
Passive surge-protected RJ45 Ethernet ports.
The ETH-SP-G2 must be grounded by one of the following methods:
Using the included Self-Tapping Screw to ground the ETH-SP-G2 directly to a grounded
metal pole or structure; or
Using an M5 machine screw and nut (not included) to attach a drain wire that is
ETH-SP-G2 Quick Start Guide

Ubiquiti ETH-SP-G2 Specifications

General

Type	Surge Protector
Ports	2
Connector Type	RJ45
ESD/EMP Protection	Yes
DC Spark-Over Voltage	6V
Maximum Discharge Current	10kA
Data Line Protection	Yes
Operating Temperature	-40 to 70 °C
Interface	Gigabit Ethernet
Protection Standard	IEC 61643-21

Summary

Package Contents

Hardware Overview

ETH IN/OUT Port

Passive surge-protected RJ45 Ethernet ports for network connection.

Grounding Point

Connection point for grounding the device to prevent surge damage.

Installation Requirements

Installation Procedures

Pole Mounting

Step-by-step guide for installing the ETH-SP-G2 on a pole.

Wall Mounting

Step-by-step guide for installing the ETH-SP-G2 on a wall.

Connecting Ethernet

Instructions for connecting the Ethernet cable to the device.

Product Specifications

Safety and Warnings

General Safety Notices

Essential safety instructions and warnings for product use.

Electrical Safety

Guidelines and precautions for electrical connections and operation.

Compliance and Resources

Regulatory Compliance

Information on FCC, ISED Canada, Australia/NZ, CE, and WEEE compliance.

Online Resources

Links to further documentation and support.