Need help?Do you have a question about the Ubiquiti G5 Dome and is the answer not in the manual?
General| Weather Resistance | IPX4 |
|---|---|
| Frame Rate | 30 FPS |
| Audio | Built-in Microphone |
| Compatibility | UniFi Protect |
| Night Vision | Yes, IR LEDs |
| Power Method | PoE (802.3af) |
| Camera | CMOS Sensor |
| Video Resolution | 2688 x 1512 |
| Lens | 2.8 mm |
| IR Range | Up to 10 meters |
| Networking Interface | 10/100 Ethernet |
| Mount | Wall/Ceiling Mount |
| Operating Temperature | -20 to 50° C |
Drilling pilot holes and a larger cable hole for ceiling mount.
Securing the mounting bracket to the ceiling surface.
Connecting the network cable and attaching the camera to the bracket.
Recommended spacing and positioning for wall-mounted cameras.
Drilling holes in the wall for the wall mount bracket.
Securing the mounting bracket to the wall.
Connecting the network cable and mounting the camera to the wall bracket.
First step in camera adjustment with a rotation indication.
Adjusting the camera lens for focus and angle.
Final step to secure the camera lens after adjustment.
Completing the camera positioning and adjustment steps.
Visual guide of network connectivity from Internet to camera.
Connecting the camera using PoE through a switch.
Downloading and installing the UniFi Protect mobile app for management.
To Next Page