Need help?Do you have a question about the Ubiquiti UniFi Protect ViewPort and is the answer not in the manual?
General| Dimensions | 127.7 x 127.7 x 30.3 mm (5 x 5 x 1.2") |
|---|---|
| Weight | 320 g (11.3 oz) |
| Enclosure Material | Plastic |
| Operating Temperature | 0 to 35° C (32 to 95° F) |
| Operating Humidity | 10 to 90% (non-condensing) |
| Display Interface | HDMI |
| Display Resolution | Up to 4K |
| Video Output | HDMI |
| Compatibility | UniFi Protect |
| Connectivity | Ethernet |
| Power Method | PoE (802.3af) |
| Processor Specs | Quad-Core Cortex-A53 |
| Memory | 2 GB |
| Networking Interface | Gigabit Ethernet |
| Supported Voltage Range | 44 - 57VDC |
| Network Interface | 1 x 10/100/1000 Mbps RJ45 Port |
Explains how to perform a factory reset using the reset button.
Instructs on connecting the device via Ethernet to a PoE switch.
Details connecting the ViewPort to a display via HDMI.
Guides users on how to log into the UniFi Protect software.
Explains the process of adding the ViewPort device within the UniFi Protect interface.
Covers essential safety precautions for using the device, including electrical hazards.
Outlines the device's compliance with radiation exposure limits.
To Next Page