Need help?Do you have a question about the Ubiquiti UniFi SmartPower USP-RPS and is the answer not in the manual?
General| Input Voltage | 100 - 240 VAC |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Voltage | 54 VDC |
| Dimensions | 200 x 129 x 32.5 mm (7.87 x 5.08 x 1.28") |
| Weight | 750 g (1.65 lb) |
| Enclosure Characteristics | Metal |
| Supported Voltage Range | 100-240VAC |
| Efficiency | Up to 90% |
| Power Supply | Internal |
| Operating Humidity | 5 to 95% Noncondensing |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Compatibility | UniFi devices |
Details states and animations of the device's touchscreen interface.
Explains the status indications of the RJ45 port's LED light.
Describes the 10/100/1000 Ethernet port and its default DHCP client setting.
Explains how to reset the device to factory defaults using the reset button.
Indicates the LED status for active power connection on USP RPS ports.
Details connecting the USP Cable to UniFi devices with USP Connect DC input.
Instructions for connecting the power cord to the device's power port.
Guide to adopting the USP-RPS device within the UniFi Controller software.
Details device compliance with FCC rules and operational conditions for interference.
States compliance with ISED Canada regulations for radio frequency emissions.
Notes compliance with CISPR 32 standards for radio interference in residential areas.
Indicates the product conforms to all applicable EU directives.
Statement regarding Waste Electrical and Electronic Equipment compliance.
Formal statement confirming the product's adherence to relevant standards.
To Next Page