Need help?Do you have a question about the Ubiquiti UniFi Switch 48-500W and is the answer not in the manual?
General| Model | US-48-500W |
|---|---|
| Total Non-Blocking Throughput | 70 Gbps |
| Switching Capacity | 140 Gbps |
| Forwarding Rate | 104.16 Mpps |
| Max. Power Consumption | 500W |
| Power Method | 100-240VAC/50-60 Hz, Universal Input |
| Rackmount | Yes, 1U |
| PoE Budget | 500W |
| Operating Temperature | -5 to 40° C (23 to 104° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| VLAN | Yes |
| Management | UniFi Network Controller |
| Ports | 48 Gigabit RJ45 Ports |
| Power Supply | Internal |
| PoE | 802.3af/at |
Lists items included in the box, such as power cord, screws, and guide.
Details software and browser requirements for setup and operation.
Illustrates a typical network setup with UniFi devices and the switch.
Explains the meaning of the System LED states (White, Flashing White, etc.).
Describes the LEDs for RJ45 ports (PoE, Speed/Link/Act).
Details the LED status for SFP+ and SFP ports (Speed/Link/Act).
Explains port types, capabilities, and the functions of the Reset button.
Describes the back panel ports and side panel ventilation.
Lists necessary tools, rack space, and cabling standards for installation.
Covers essential ventilation warnings and rack mounting procedures.
Guides on connecting the power cord and Ethernet cables to the switch.
Explains how to install fiber modules and connect fiber optic cables.
Guides on downloading, installing, and logging into the UniFi Controller software.
Steps to find and adopt the UniFi Switch within the UniFi Controller dashboard.
Explains how to select the switch and navigate to the Ports tab for configuration.
Details selecting PoE mode (Off, 24V Passive, PoE+) and applying changes.
Lists dimensions, weight, power, certifications, and network interfaces.
Provides specific PoE interface, wattage, and voltage range information.
Lists essential safety precautions regarding ventilation, moisture, and electrical hazards.
Covers compliance, service, power cord, and grounding requirements.
Outlines conditions under which the product warranty does not apply.
Explains the process for product returns and obtaining an RMA number.
States disclaimers of warranties and limitations on Ubiquiti's liability for product use.
Details compliance with FCC and Industry Canada regulations for digital devices.
Explains CE marking and disposal regulations (RoHS/WEEE) in English and German.
Provides compliance statements in Spanish and French.
Outlines the compliance statement in Italian.
States that the Ubiquiti Networks device complies with essential requirements and provisions.
Déclaration de conformité de l'appareil Ubiquiti Networks en français.
Erklärung zur Konformität des Ubiquiti Networks Geräts in deutscher Sprache.
Declaración de conformidad del dispositivo Ubiquiti Networks en español.
Dichiarazione di conformità del dispositivo Ubiquiti Networks in italiano.
Provides URLs for technical support, community forums, and software downloads.
To Next Page