To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti UniFi USW-16-POE and is the answer not in the manual?
General| Model | USW-16-POE |
|---|---|
| Category | Switch |
| Total Ports | 16 |
| PoE Standard | 802.3af/at |
| Rack Mountable | Yes |
| Total Non-Blocking Throughput | 16 Gbps |
| Power Method | 100-240VAC/50-60 Hz, Universal Input |
| Supported Voltage Range | 100-240VAC |
| PoE Budget | 42W |
| Management | UniFi Network Controller |
| Certifications | CE, FCC, IC |
| Power Supply | Internal AC/DC |
| Max. Power Consumption | 150W |
| Interfaces | 2 x SFP ports |
| Operating Temperature | -5 to 40° C |
| Operating Humidity | 10 to 90% Noncondensing |
Describes LED states and animations for the touchscreen.
Explains LED status for PoE ports 1-8.
Explains restart and factory reset operations.
Steps to acquire and install the controller software.
Process of adding the switch to the controller network.
Wattage and voltage range for PoE ports.
Critical warnings for safe operation.
Requirements for power cord and grounding.
