Need help?Do you have a question about the Ubiquiti UniFi USW-Pro-24-POE and is the answer not in the manual?
General| Total Ethernet Ports | 24 |
|---|---|
| SFP+ Ports | 2 |
| Switching Capacity | 88 Gbps |
| Max. Power Consumption | 400W |
| PoE Budget | 400W |
| Rackmountable | Yes |
| Enclosure Material | Metal |
| Total Non-Blocking Throughput | 44 Gbps |
| Forwarding Rate | 65.472 Mpps |
| Supported Voltage Range | 100-240VAC |
| Max. PoE+ Wattage per Port by PSE | 30W |
| ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
| Certifications | CE, FCC, IC |
| Management | UniFi Controller |
| VLAN Support | Yes |
| Weight | 4.7 kg |
| PoE | IEEE 802.3af/at |
| Operating Temperature | -5 to 40° C |
| Operating Humidity | 5 to 95% Noncondensing |
| Power Supply | Internal |
| Dimensions | 442.4 x 285.4 x 43.7 mm |
Details the states and meanings of the touchscreen display for the UniFi Switch.
Explains the PoE status indicated by LEDs on the RJ45 ports.
Describes the link and activity status LEDs for RJ45 ports.
Explains link and activity status for SFP+ ports.
Details the functionality and specifications of RJ45 ports 1 through 16.
Details the functionality and specifications of RJ45 ports 17 through 24.
Describes the features and capabilities of SFP+ ports 25 and 26.
Explains the blue LED indication for active power connection on the USP DC input.
Details the redundant power connection via USP DC input.
Instructions on connecting the power cord to the device's power port.
Details the device's compliance with FCC rules and potential interference.
States compliance with ISED Canada regulations, specifically CAN ICES-3(A)/NMB-3(A).
Notes compliance with Class A of CISPR 32 for Australia and New Zealand.
Explains that the CE marking indicates compliance with applicable directives.
To Next Page