Ubiquiti UVC-G4-BULLET - User Manual

Camera Cable Gland Screw Anchors (Qty. 2)
Self-Tapping Screws (Qty. 2) Pole Mount Bracket Machine Screws (Qty. 2)
Package Contents
Installation Requirements
Shielded Category 5 (or above) cabling should be used for all wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
For more details, visit: ui.com/toughcable
Hardware Overview
UVC-G4-BULLET Quick Start Guide

Ubiquiti UVC-G4-BULLET Specifications

General

Camera Type	IP Camera
Resolution	4MP
Max. Resolution	2688 x 1512
Night Vision	Yes
Power Supply	PoE (802.3af)
Weather Resistance	IP67
Weather Resistance (Alternative)	Weatherproof
Night Mode	IR LED
Video Compression	H.264
Networking Interface	Ethernet
Power Method	Power over Ethernet (PoE)
Image Sensor	1/3" CMOS

Summary

Package Contents

Installation Requirements

Hardware Overview

Ethernet Port

Gigabit RJ45 port for PoE power and data connection.

Reset Button

Button to reset factory defaults by holding for over 10 seconds.

Hardware Installation

Ceiling Mount

Instructions for mounting the camera on a ceiling.

Wall Mount

Instructions for mounting the camera on a wall.

Pole Mount

Connecting to a PoE Switch

Adjusting the Camera View

Specifications

Safety Notices

Hot Surface Warning

Warning about hot surfaces and advising not to touch the device.

Water Submersion Warning

Warning against using the product in locations submerged by water.

Electrical Storm Warning

Warning about potential lightning shock during electrical storms.

Electrical Safety Information

Limited Warranty

FCC Compliance

ISED Canada Compliance

Australia & New Zealand Compliance

CE Marking Information

WEEE Compliance Statement

Declaration of Conformity

Online Resources