The UB+ EUPHO E2+ SOLACE (Model: M05) is a large-sized wireless speaker designed for modern mobility, incorporating elements of traditional speaker design with advanced audio technology.

Function Description:

The EUPHO E2+ SOLACE speaker serves as a wireless audio output device, primarily connecting to other devices via Bluetooth. It supports True Wireless Stereo (TWS) pairing, allowing two EUPHO E2+ speakers to be linked for a stereo sound experience. The speaker can be powered on/off, put into standby mode, and reconnected to previously paired Bluetooth devices. It also features volume control and an auxiliary input for wired connections.

Important Technical Specifications:

Model: M05
Battery Charging Temperature: 0-45°C
Usage Temperature: 0-50°C
Power Input: USB Type C (certified according to IEC60950-1 as LPS or IEC62368-1 as PS2)
Wireless Connectivity: Bluetooth
Frequency Band of Operation: 2400 to 2480 MHz
Battery Type: Lithium-ion (internal, non-user replaceable)
Warranty: 24 months from the date of purchase.

Usage Features:

Power On/Off:
- Press the Power button once to turn the speaker on.
- Press and hold the Power button for 5 seconds for a full shutdown.
Standby Mode:
- Press the Power button once to put the speaker into standby.
- Press the Power button once again to exit standby mode.
- Press the Power button once more to reconnect to the last used Bluetooth device(s).
Bluetooth Pairing:
- Press and hold the Power button for 3 seconds to enter Bluetooth pairing mode.
- The speaker will provide "pairing" audio feedback and an indicative tone when successfully paired.
Volume Control:
- Press the "-" button once to decrease volume.
- Press the "+" button once to increase volume.
True Wireless Stereo (TWS) Pairing:
- (Only with two EUPHO E2+ speakers)
- When the speaker is switched on, press and hold both the Volume down ("-") and Volume up ("+") buttons together for 3 seconds.
- The speakers will automatically pair with each other if they are in proximity.
Auxiliary Input: The speaker includes a 3.5mm auxiliary input for wired audio connections.
Assembly Options: The speaker can be used with a tabletop base or a tripod wooden stand with a base plate. A leather strap is also included for portability or alternative placement.

Maintenance Features:

Cleaning: Clean the product with a soft, dry cloth only.
Battery Handling:
- Do not handle leaking or damaged batteries.
- Dispose of used batteries according to local regulations.
- Do not dispose of the battery in environments with high heat, water, or acid.
General Safety:
- Avoid direct sunlight exposure for long periods.
- Ensure the usage area is dry to prevent spoilage.
- Install the product according to instructions to prevent hazards from falling.
- Pay attention to cables to avoid stumble hazards.
- Keep the product away from children as it is not a toy.
- Do not open the enclosure to avoid electric shock hazards.
- Do not use wet hands to handle the product.
- Unplug DC power if smoke, abnormal sound, abnormal smell, excessive heat, or fire occurs.
- In case of abnormal phenomena, contact your local importer or after-sales service.
- Dispose of the product according to local regulations when out of service.
- The speaker should not be hung above 2 meters.
- Mounting parts onto a ceiling wall must withstand 4 times the weight of the equipment.
- To avoid hearing damage, do not listen at high noise levels for extended periods.

Regulatory Compliance:

FCC Compliance: This device complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any interference received.
CE Compliance: The product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other EU directive requirements. The complete declaration of conformity is available on www.ub-plus.com.

UB+ EUPHO E2+ SOLACE - Controls Overview; Power Management; Volume Adjustment; Pairing Modes

Table of Contents

Related product manuals