UCORE ELECTRONICS UCE-DSO4200C How To Update Firmware

https://ucore-electronics.com
3
Second way,
Connect UCE-DSO4200C to PC via USB Cable. Then, power up the Device while holding down
the Btn-1 button (Figure 3). Finally, release the Btn-1 button. When the device recognizes as USB
Disk, there will be a connection information on the screen (Figure 4) and it is listed in the ‘Devices
and drivers’ (Figure 2).
Figure 3.
Figure 4.

UCORE ELECTRONICS UCE-DSO4200C Specifications

General

Brand	UCORE ELECTRONICS
Model	UCE-DSO4200C
Category	Test Equipment
Language	English