To Next PageTo Next Page
Need help?Do you have a question about the UCS C-SV 20A and is the answer not in the manual?
Explains symbols indicating danger, warnings, and required qualifications for safe operation.
Manufacturer's rights regarding product modifications and manual updates; disclaimer on warranty.
Physical dimensions of the C-SV 20A and C-SV IB 20A control units.
Instructions for selecting and preparing the mounting location for the control unit.
Guidelines and warnings for making electrical connections to the control unit.
Step-by-step process for calibrating the control unit after installation.
Identification and function of control unit components like LEDs, buttons, and interfaces.
How to set up the control unit's initial parameters using dip-switches and potentiometers.
Triggers and behavior of the control unit in emergency mode.
Description of the EM SIG clean contact output for alarm signaling.
Description of the EM CL SIG output for emergency closing status.
Description of the AUX SIG output for signaling system faults.
How the emergency interlock function is activated and its effects.
Procedures for resetting the control unit from emergency or fault states.
Using the EM CL input for specific emergency closing commands.
Using push buttons for manual opening and closing of ventilation zones.
Connecting and using a thermostat for climate control of ventilation.
Connecting and using a CO2 sensor for air quality monitoring and ventilation.
Connecting and configuring a wind sensor for weather-based ventilation control.
Connecting and using a rain sensor to automatically close ventilation.
Recommended periodic checks to ensure proper functioning and status indication.
Information on battery maintenance, replacement, and charging.
General| Brand | UCS |
|---|---|
| Model | C-SV 20A |
| Category | Control Systems |
| Language | English |
