UE Systems ULTRAPROBE 10000 Instructions

TQC Work Verify
Ultrasound Ultraprobe 10,000 Instructions
Valve Inspection ABCD Sometimes E Method:
Rev. 1.0 3/2012 SAFETY: Wrist Strap to be Worn at ALL TIMES
2-5 min
UE Systems Training
*Compact Flash Card & Module Inserted BEFORE Turning Ultraprobe ON*
Needed: Ultraprobe 10,000 and CF card;
Stethoscope Module; Rubber Focusing Probe;
Headphones
1
Extension Rods for Stethoscope Module when
needed for Hard To Reach areas.
2
Move Cursor to Function Bar by Pushing
Sens.Knob 2X and Press Enter for Setup Menu
3
If Using a Route, move Route to Flash Card, then
load to Ultraprobe by using Data Transer. Refer to
Instructions "Loading Route."
4
Page 1 of
6

UE Systems ULTRAPROBE 10000 Specifications

General

Frequency Range	20 kHz to 100 kHz
Weight	1.1 kg (2.4 lbs)
Dimensions	24.13 x 10.16 x 12.7 cm (9.5 x 4 x 5 in)
Operating Temperature	0°C to 50°C (32°F to 122°F)
Display	LCD
Power Supply	Rechargeable battery
Outputs	Headphone