EasyManua.ls Logo

uebe cyclotest mySense - Safety Instructions

uebe cyclotest mySense
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-4 EN-5
Safety instructions Safety instructions
The device must be used solely for the purpose described in these
operating instructions. The manufacturer shall not be held liable for
any damages resulting from improper use.
Protect the device from dirt, dust and strong sunlight and keep the
device away from excessive heat or cold.
Using the thermometer in a way that does not comply with the in-
tended operating conditions can result in inaccurate measurement
values.
Before each measurement, check the integrity of the measuring tip.
A damaged measuring tip can cause injuries.
Do not bite or bend the sensor. This can cause damage and lead to
malfunctions.
The use of this device near mobile phones, radios or other strong
electromagnetic elds can cause errors and malfunctions. Maintain
a distance of at least 3.3metres from such devices when using the
device.
The thermometer contains small parts that could be swallowed by
children. Do not leave the device unattended with children.
If the device has been stored at temperatures below 10°C or above
40°C, allow it to stand at room temperature for at least 2 hours be-
fore using it.
If the device is not being used for an extended period of time, re-
move the battery.
Always store the thermometer in the protective cover.
Do not open the device (except when changing the battery).
Do not allow the thermometer to fall on the oor. The thermometer
is not shock-resistant or impact-resistant.

Related product manuals