Need help?Do you have a question about the UEi CD200 and is the answer not in the manual?
General| Type | Combustible Gas Leak Detector |
|---|---|
| Sensor Type | Semiconductor |
| Alarm | Audible and visual |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Detectable Gases | Natural gas, propane, butane, methane |
| Detection Range | 0 to 100% LEL |
Lists key capabilities like adjustable tick rate, visual LED detection, and separate alarm.
Advises reading safety information, explaining hazard terms, and discussing explosion risks.
Explains various safety and electrical symbols used in the manual.
Identifies and describes the function of each control and indicator on the instrument.
Details the warm-up sequence, functional testing, gas detection, and alarm activation.
Explains how to adjust the tick rate using the rotary wheel for leak isolation.
Describes the six LED indicators and how they represent gas concentration levels.
Explains how to set the alarm level using the thumb-wheel for sensitivity.
Describes the function of the alarm mute button and its effect on the alarm lamp.
Provides instructions on cleaning the instrument case and sensor tip guard.
Details procedures for replacing batteries and the sensor unit.
Lists common malfunctions, checks, and corrective actions for the instrument.
Lists physical, operational, and performance specifications of the CD200.
Covers calibration procedures and environmental limits for optimal use.
Lists common combustible, toxic, and nuisance gases the CD200 can detect.
Details the three-year warranty, coverage, exclusions, and repair process.
Provides contact information for warranty service and repairs.
To Next Page
