What to do if my UFESA BS2450 ONYX GO! Blender automatically stops when running?
If your UFESA Blender stops automatically while running, it might be due to insufficient food or liquid content. To resolve this, add more food or liquid to the blender and restart the blending process.
Why is my UFESA Blender mixer not working and the red light is on?
If the UFESA Blender mixer isn't working and the red light illuminates for 5 seconds, the batteries may be low or completely drained. You should charge the batteries using the USB port.
What to do if red and white lights flash on my UFESA Blender?
If the red and white lights on your UFESA Blender flash alternately for 10 seconds while it's running, the motor might be locked. Remove any hard objects that may be stuck and then restart the blender.
What causes a UFESA BS2450 ONYX GO! Blender to leak?
If your UFESA Blender is leaking, it's likely that the silicone ring is not properly in place. Please reinstall the silicone ring correctly.
Why is my UFESA BS2450 ONYX GO! fuming?
If your UFESA Blender is producing fumes, it's likely due to prolonged use, which triggers the automatic overheat protection. Allow the machine to cool down for 30 to 60 minutes before restarting it.
To Next Page
General
