EasyManua.ls Logo

UFESA Multihydro - Technical Specifications and Dimensions; Special Accessories

UFESA Multihydro
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
EN
Specifications
DH1UF18M DH1UF21M DH1UF24M
Rated power
[kW] 18 21 24
Rated voltage
[V] 400 V 3~ 400 V 3~ 400 V 3~
Economy setting 1
1st stage [kW] 6 7 8
2nd stage [kW] 12 14 16
Intensive setting 2
1st stage [kW] 9 10.5 12
2nd stage [kW] 18 21 24
Switch-on point
1st stage [l/min] 4.0 4.5 5.0
2nd stage [l/min] 5.0 5.8 6.6
Mixed water at rated power
approx. 38 °C [l/min] 9.9 11.6 13.2
approx. 50 °C (supply temperature 12 °C) [l/min] 6.8 7.9 9.1
Minimum flow pressure of appliance*
with flow limiter [MPa (bar)] 0.07 (0.7) 0.08 (0.8) 0.09 (0.9)
without flow limiter [MPa (bar)] 0.04 (0.4) 0.05 (0.5) 0.06 (0.6)
Operative range in waters
of specific electric resistance at 15 °C
[Ωcm] ≥ 1300 ≥ 1300 ≥ 1300
Rated pressure
[MPa (bar)] 1 (10) 1 (10) 1 (10)
Maximum permissible supply temperature
[°C] 20 20 20
Energy efficiency class
AAA
Load profile
SSS
Annual energy consumption
[kWh] 481 483 483
Daily energy consumption
[kWh] 2.215 2.228 2.232
Sound power level
[dB] 15 15 15
Hot water heating energy efficiency
[%] 38.4 38.2 38.1
* Plus any pressure loss at the tap mixer
C
Dimensions
Special accessories
BZ45U20 Pipe set: for use of the continuous-flow heater
as an under sink appliance
Priority switch (load shedding relay) BZ45L21:
for operation with the priority circuit
Mounting set BZ45K23: for surface-mount installation