What to do if the Red LED is flashing when discharging UFO Power U-P48100?
If the red LED flashes during discharging, it indicates that the battery is too low and is about to shut down. To resolve this, charge the battery immediately.
Why is the Red LED flashing when standby on my UFO Power U-P48100?
The red LED flashing during standby indicates that the battery cell voltage is low. You should charge the battery immediately.
What to do if there is no indication and alarm in the front display panel of UFO Power U-P48100 even after Reset?
If there is no indication and alarm on the front display panel even after a reset, it means the battery voltage is too low. You should charge the battery immediately.
Why is the RED LED lighting continuously on my UFO Power U-P48100 Battery Pack?
A continuous RED LED light indicates that there is something wrong with the battery and it needs to be repaired.
How to fix no indication and alarm in the front display panel on UFO Power U-P48100?
If there is no indication and alarm on the front display panel, it might be in sleeping mode. Press the Reset button to return to normal mode.
Hazards of high voltage and requirements for using specialized tools.
Guidelines for static discharge, power disconnection, short circuits, and temperature limits.
Technical details of the battery pack, including capacity, voltage, and physical dimensions.
Key parameters for the Battery Management System (BMS) covering protection, alarms, and settings.
Steps for unpacking, inspecting the unit, and identifying the battery pack's front panel components.
Detailed instructions for the physical mounting of a single battery unit.
Procedures for connecting batteries in parallel and essential safety precautions to follow.
Procedures for the initial startup of the battery system and checking operational status.
Configuration of parallel communication and setting unique addresses for battery modules.
Guide to installing and utilizing the PC software for real-time battery monitoring.
Pin definitions for RS485, CAN, and RS232 communication ports on the battery.
Explanation of LED status lights and optional buzzer alerts for battery operational status.
Functionality of the reset key and management of system modes like dormancy and shutdown.
Solutions for common battery operational problems and symptoms encountered by users.
Recommendations for proper battery storage, routine maintenance, and safety during service.
Disclaimer on liability, product updates, warranty details, and contact for technical support.
General| Model | U-P48100 |
|---|---|
| Nominal Voltage | 48V |
| Capacity | 100Ah |
| Energy | 4.8kWh |
| Weight | 45kg |
| Operating Temperature | -20°C to 60°C |
| Output Voltage | 48V |
| Output Current | 100A |
| Input Current | 20A |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Type | LiFePO4 |
| Charging Time | 5 hours |
To Next Page