EasyManuals Logo

UGREEN PowerRoam User Manual

UGREEN PowerRoam
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
05
Press to turn on
Press and hold for 3
seconds to turn off
In the standby state,
press to turn on. Press
again to turn off.
3S
×1
SpeakerProjector
×1
Powering Your Devices
Tip:
While powered on, if the power station is not used within 1 minute, the display automatically turns off.
Press any button to turn display on.
Tips:
· To switch AC output frequency, press and hold the AC Power Button for 10 seconds while the AC output is off.
· Please check the rated frequency of the device before use. Improper frequency settings will result in damage
to the power station and connected device(s).
Power On/Power Off
AC Output
EN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UGREEN PowerRoam and is the answer not in the manual?

UGREEN PowerRoam Specifications

General IconGeneral
Output Power1200W
Battery TypeLiFePO4
Cycle Life3000 cycles to 80% capacity
Charging MethodsAC, Solar, Car
USB-C Output100W Max
Solar Charging Input200W Max
USB-A Output18W
Car Output12V/10A
AC Outlets2 x 120V