To Next Page
J
Joel CooperJul 29, 2025
What to do if UGREEN PowerRoam shows output overload?
- MmorenojessicaJul 30, 2025
If your UGREEN Portable Generator shows an output overload, remove all connected external devices from the power station and then restart it.
What to do if UGREEN PowerRoam shows output overload?
If your UGREEN Portable Generator shows an output overload, remove all connected external devices from the power station and then restart it.
What to do if UGREEN Portable Generator has discharging high-temperature protection?
If the UGREEN Portable Generator activates discharging high-temperature protection, remove all connected external devices. Place the power station in a cool, well-ventilated area and wait 10 minutes before turning it on again.
What to do if UGREEN PowerRoam has discharge undervoltage protection?
If your UGREEN Portable Generator indicates discharge undervoltage protection, it means the battery is low. Please charge it promptly.
What to do if UGREEN PowerRoam shows charging high-temperature protection?
If your UGREEN Portable Generator indicates a charging high-temperature protection, you can either enable Quiet mode via the app, or stop charging it, turn it off, and wait 10 minutes before resuming the charge.
General| Output Power | 1200W |
|---|---|
| Battery Type | LiFePO4 |
| Cycle Life | 3000 cycles to 80% capacity |
| Charging Methods | AC, Solar, Car |
| USB-C Output | 100W Max |
| Solar Charging Input | 200W Max |
| USB-A Output | 18W |
| Car Output | 12V/10A |
| AC Outlets | 2 x 120V |
Lists and describes the physical components of the power station.
Critical safety warnings regarding battery and usage.
Important guidelines for safe operation and maintenance.
Instructions for safely transporting and storing the power station.