The UHPPOTE HBK-D01 is a Wiegand RFID Reader designed for access control systems. It cannot function as a standalone device and requires connection to a Wiegand protocol access controller, such as an access control panel, fingerprint device, or master controller. The reader utilizes an ST MCU to ensure stable performance and features a low-power circuit to extend its lifespan.
Function Description:
The HBK-D01 serves as an RFID card reader within an access control system. It reads RFID cards and transmits the card data to a connected access controller via the Wiegand protocol. The reader supports both Wiegand 26-bit and Wiegand 34-bit output formats, providing flexibility for integration with various access control systems. It is designed for security door systems, offering ease of connection and use. Its applications include factories, homes, residential quarters, offices, and mechanical and electrical control equipment. The device provides visual and auditory feedback for card reading, indicating authorized or unauthorized access.
Important Technical Specifications:
- Working Voltage: 12VDC
- Static Current: ≤50mA
- Working Humidity: 10%-90%RH
- Frequency: 125KHz
- Product Weight: 2.96oz [84g]
- Card Type: EM-ID
- Lead Cable Length: 9-27/32" [250mm]
- Waterproof Rating: IP66
- Enclosure Material: ABS Plastic
- Panel Material: PC Plastic
- Status Indication: Bi-color LED + Buzzer
- Communication Distance: <328' [100m]
- Enclosure Size: 3-35/64″ x 1-49/64" x 3/4″ [90x45x19mm]
- Working Temperature: -40 to +140°F [-40 to +60°C]
- Output Format: Wiegand 26bits (default), Wiegand 34bits (optional)
- LED Status Indication: Red means standby, Green means activated
Usage Features:
- Waterproof Design: The HBK-D01 is waterproof, complying with the IP66 standard, making it suitable for various indoor and outdoor environments.
- Reading Distance: It offers a maximum reading distance of 2-23/64" [6cm].
- Ultra-low Power Consumption: The standby current is less than 50mA, contributing to energy efficiency.
- Fast Response Speed: The door opening time is less than 0.3 seconds, ensuring quick access.
- Output Format Flexibility: Supports both Wiegand 26bits (default) and Wiegand 34bits output formats. If Wiegand 34bits is desired, the gray wire and black wire must be connected together.
- Visual and Auditory Feedback:
- Standby: Red LED.
- Read Authorized Card: Green LED with a short beep.
- Read Unauthorized Card: Red LED flashes 3 times with 3 short beeps.
- Note: Sound and light indications are only active when the LED and BEEP cables are connected to the access controller. If these cables are not connected, the reader will not provide sound and light prompts for authorized cards.
- Wiring Definition:
- Red: +12V (power input)
- Black: GND
- Green: D0 (Wiegand output D0)
- White: D1 (Wiegand output D1)
- Blue: LED (LED signal feedback)
- Yellow: BEEP (Buzzer signal feedback)
- Gray: Wiegand 34bits (optional – connect with Black for 34-bit output)
- Installation:
- Remove the back cover from the reader.
- Drill 2 holes in the wall for self-tapping screws and 1 hole for the cable.
- Insert the supplied plastic anchors into the 2 holes.
- Fix the back cover firmly to the wall with 2 self-tapping screws.
- Pass the cable through the cable hole.
- Fix the reader to the back cover.
Maintenance Features:
- Power Supply Confirmation: Always confirm the voltage (12VDC) and differentiate between the positive anode and cathode of the power supply before connecting.
- Wiring Guidelines:
- The wire between the reader and the controller should be at least 22 AWG.
- The maximum length of the wire should not exceed 100 meters.
- When using external power, it is recommended to use the same power GND as the controller panel.
- It is advisable to use multi-strand twisted pair cable to connect the card reader to the access controller for optimal performance and to minimize interference.
- FCC Compliance: The device complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any interference received. Any changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. If interference occurs, users are advised to reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment to a different circuit outlet, or consult a dealer/experienced radio/TV technician. For RF exposure compliance, the equipment should be installed and operated with a minimum distance of 20cm between the radiator and the user's body, using only the supplied antenna.
Packing List:
The package includes:
- Card Reader x1
- User Manual x1
- Plastic Anchors x2 (used for fixing)
- Self-Tapping Screw x2 (#7 x 1", used for fixing)
Upon opening the package, users should verify that the card reader is in good condition and all accessories are complete.
Need help?
General
To Next Page