WM-08 wireless mouse Instruction Manual
1: Insert the MINI receiver into the USB port of the computer (the MINI
receiver is in the storage box at the bottom of the mouse), as shown in
the figure
70/5000
2: Turn ON the power switch to the ON position and click the left or
right mouse button in the blank space of the computer desktop. When
the mouse is moved, the cursor can be moved. At this time, you can
easily use your 2.4G wireless optical mouse.
3. toggle the switch button to the ON/LED position. There are many
colorful light modes inside the mouse, which can be switched by the
light mode button.
To Next Page
General