UIC MSR213U-12 User Manual

MSR213U SERIES
Magnetic Stripe Card Reader
USB Interface
Programmer’s Manual
Document #: PM072 Revision A
2010-07-14

UIC MSR213U-12 Specifications

General

Type	Magnetic Stripe Reader
Interface	USB
Power Supply	USB bus powered
Compatibility	Windows, Mac OS, Linux
Weight	100g
Supported Card Types	ISO 7811, AAMVA
Reading Method	Swipe
Data Tracks	Track 1, 2, 3
Dimensions	90mm x 27mm x 28mm

Summary

Section 3. Technical Specifications

MSR213U Magnetic Card Compatibility

Details magnetic card types, thickness, format, and operation speed supported by the MSR213U.

MSR213U Electrical and Communication Specs

Section 5. USB Communication Specifications

MSR213U USB Connector Pin Assignment

MSR213U Data Output Format Details

MSR213U Card Data Transmission

Section 6. Command and Response

MSR213U Command Protocol

Defines the HEADER, Length, Command, and Data structure for commands and lists available commands.

MSR213U Response Protocol

Describes the HEADER, Length, and Response (ACK/NAK) format for responses received from the MSR213U.

Section 7. Memory Map of the System EEPROM

MSR213U EEPROM Data Summary Table

Provides a summary of EEPROM bytes, their descriptions, and default hexadecimal values.

MSR213U Keyboard EEPROM Map

Details the EEPROM memory map (bytes 1-180) for Keyboard interface configurations.

MSR213U M Mode EEPROM Map

Details the EEPROM memory map (bytes 201-320) for M Mode configurations.

MSR213U I Mode EEPROM Map

Details the EEPROM memory map (bytes 321-440) for I Mode configurations.