UK Link UK-8204 User Manual

1 / 9
Instruction for how to log in UK-LINK DVR
This lesion is only suitable for the following model number:
 UK-8204 with HDMI
 UK-8208 with HDMI
Step 1: set the DVR ports and LAN IP, DDNS.
Connect all the power cable, BNC/VGA cable, USB mouse and so on.
On the desktop click right-click you will see the following page:
Click “SETUP”:

UK Link UK-8204 Specifications

General

Hard Drive Support	1 SATA HDD
Video Compression	H.264
Motion Detection	Yes
Operating System	Embedded Linux
Video Input	4 channels
Audio Output	1 channel
Remote Viewing	Yes
Audio Input	4 channel RCA

Summary

Instruction for how to log in UK-LINK DVR

Step 1: Set DVR Ports, LAN IP, and DDNS

Configure network settings on the DVR, including server, IE, and mobile ports, plus IP and DNS.

Step 2: Configure Router Port Forwarding

Add required ports (Server, IE, Mobile) to the router's virtual server settings for external access.

Step 3: Configure PC Browser for Access

Adjust Internet Explorer security settings to enable ActiveX controls and plugins for DVR viewing.

Step 4: Mobile Viewing Setup with CPlayer

Install and configure the CPlayer application on Android or iPhone for remote DVR monitoring.