ULANZI AY6C - Power On;Off; Set the Working Mode

To Next Page

To Previous Page

USE USE

Long press the [] button to turn on the power, the LED lights up

and displays current battery level and working mode. Long press

the button again to turn off the power.

1. Power ON/OFF

Long press the [ ] button to set coarse or fine adjustment. Select F (Fine) to enter fine adjustment,

and the unit of color temperature adjustment is 100K, while other parameters 1%. Select C (Coarse)

to enter coarse adjustment, and the unit of color temperature adjustment is 500K, while other

parameters 5%.

3. Set Coarse or Fine Adjustment

Short press the [ ] button to set working mode, and cycle through

CCT mode, HSI mode, RGB mode, and SCENE mode.

2. Set the Working Mode

Note

Once turning on, the OLED display shows the memorized parameters of the previous use and the light wand works based

on these parameters.

English