-2- USE INSTRUCTIONS TFS 100
7/38
3 VERIFICATIONS BEFORE INSTALLATION
3.1 TRANSPORT INSTRUCTIONS
For the transport and installation of the machine, you must prepare a forklift
truck (remember the weight of the machine).
Precautions to be taken:
-Lift the machine by its centre of gravity, which may not be the centre of the
machine.
-When you lift the machine with the forklift truck, do so by its front part
(opposite to the electrical cabinet). Verify the existence of components sticking out
of the lower part of the machine.
-Do never lift the machine by its ends or extensions.
-Always be extremely careful when lifting and transporting the machine.
-Approximate weight of the machine: 400kg.
-If you want to lift the machine with a crane, you must protect the contact
areas of the slings with the framework in order to avoid scratches and distortions.
To Next Page
Loading...
