-2- USE INSTRUCTIONS TFS 100
22/38
Dangerous areas
1-Lower film inlet
2-Forming area
3-Sealing area
4-Electrical cabinet
5-Upper film inlet
6-Cross-cutting
7-Longitudinal cutting
8-Side guards and mechanisms
9-Product outlet area
10-Optional mechanisms
Before starting to work in any of the abovementioned dangerous areas,
the main switch must be reset, i.e., the machine must be disconnected.
ATTENTION
DANGER OF ELECTROCUTION IN THE HEATING RESISTANCES OF THE
ELECTRIC CABINET:
To Next Page
Loading...
