-3- SCREEN PP45
10/29
1.6 CUTTING
Depending on the configuration of the machine, some of the following
parameters may not be changed or displayed.
Transversal cutting: Transversal cutting activation.
Transversal cutting in multiple pitch: Activates transversal cutting with multiple
advance.
Longitudinal cutting 1: First longitudinal cutting activation.
Longitudinal cutting 2: Second longitudinal cutting activation.
Longitudinal cutting 3: Third longitudinal cutting activation.
Cutting: Time of package cross cutting.
Cutting delay: Delay time from the end of the advance until cutting is made.
Labeler: Labeler activation (only if the machine has the labeler option).
Transversal cutting manual. Activates the transversal cutting manually.
Labeller manual. Activates the labeller manually (only if it has labeller option).
To Next Page
Loading...
