-3- SCREEN PP45
15/29
1.10.3 MAINTENANCE
1.10.4 GREASING
Machine greased time. If the machine has centralised greasing, alter these hours
pass the machine will carry out a greasing cycle.
If the machine has no centralised greasing, the program will then tell us that we
have to grease the machine. We can use the reset button to reset the current value of
the timer, after manual greasing. If we don’t want to see the machine greasing
notification we can put the timer at 0.
Chain greased time. If the machine has chain greasing, alter this time passes the
machine will execute both chain greasing cycles as indicated in the chain greasing
cycles parameter.
If the machine has not chain greasing, the program will then notify us that we
have to grease the machine. Using the reset button we can reset the current value of
To Next Page
Loading...
