-3- SCREEN PP45
23/29
Sealing form manual. Sealing form goes up. If pressed again, form goes down.
Film rewinder. Activates the film rewinder manually.
Sealing. If pressed when formers closed manually, a sealing is made. Once the
sealing is finished, formers go down.
Film pitch. One advance is made manually.
Manual cycle. It makes a complete cycle, advance the film, go up the forms and end
all the cycle.
Drain gas deposit. This is the manual mode of the gas electrovalve. If we push this
button we open the gas electrovalve.
Vacuum pump ventilation. It activates the package vacuum electrovalve to air the air
filter of the vacuum pump and be able to extract it. This key must be pressed when
the machine is waiting for the automatic cycles (only if machine includes vacuum
option).
Vacuum pump. Activates the vacuum pump (only if the machine has the vacuum
option).
Inside vacuum. Activates the inside vacuum valve (only if the machine has the
vacuum option).
Vacuum test. Operation in manual mode to verify possible escapes. Pressing it once
the forms go up and begins the vacuum execution. Pressing it once more the die
remains closed. Pressing it again the mould is ventilated and the forms descend.
(only if the machine has the optional Package vacuum).
Outside vacuum. Activates the inside vacuum valve (only if the machine has the
vacuum option).
Codifier manual. Activates the codifier (only if the machine has this option).
Dosifier manual. Activates the dosifier (only if the machine has this option).
Labeller manual. Activates the labeller (only if the machine has this option).
To Next Page
Loading...
