stimulation).
Press and hold the “PROG” button at least 3 seconds, to
switch between TENS – EMS –Micro– IFT. The symbol
“TENS”, “EMS”, “Micro” and “IFT” will display on the LCD
accordingly.
Once the stimulation type is selected, press the “PROG”
button to select the related programs as below.
1) TENS Mode
P1 --- Preset program, Endorphin release
P2--- Preset program, Gate control
M--- Manual program
2) EMS Mode
P1 --- Preset program, Rehab
P2--- Preset program, Strengthening
M--- Manual program
3) Micro Mode
P1 --- Preset program, ATP
P2--- Preset program, ATP+
M--- Manual program
4) IFT Mode
P1 --- Preset program, XFreq
P2--- Preset program, XFreq +
M--- Manual program
- 16 -
To Next Page
