Need help?Do you have a question about the Ultima SHOVELHEAD ENGINES and is the answer not in the manual?
Covers manufacturing defects for Ultima® Shovelhead engines for a specified period/mileage.
Details additional conditions and limitations for Ultima® engine warranty coverage.
Identifies fittings on the Ultima® Shovelhead engine's oil pump for proper connection.
Illustrates the correct routing for oil lines to the tank and filter for Ultima® Shovelhead engines.
Describes the Ultima® Fixed Curve Single Fire Ignition System and dual plug design benefits.
Provides crucial installation notes for ignition systems, including coil resistance and spark plug wire requirements.
Shows wiring diagrams for single-plug ignition systems with single or dual coils.
Displays wiring diagrams for dual-plug ignition systems with dual or quad coils.
Explains the four flywheel timing marks used for setting ignition timing on Ultima® Shovelhead engines.
Outlines essential pre-start checks, including ensuring the oil system is clean and lines are correctly routed.
Provides a step-by-step guide to priming the oil system before initial engine startup.
Details the critical steps for the very first engine start, including throttle operation and idle settings.
Lists important "do nots" during initial start and break-in, like avoiding overheating and prolonged idling.
Provides a detailed step-by-step guide for adjusting pushrods on Ultima® engines.
To Next Page
General