Select Hardware and Sound.
Select Devices and Printers.
Select Bluetooth Devices.
Click Add a device.
Select your ULTIMATE EARS speaker from the list of devices, and then click Next. NOTE: If
the Bluetooth Device Control window opens, expand the Headset type menu, select “My hands-
free device “UE speaker” does not have a display”, and then click Apply.
Once your speaker is paired and connected, you’ll have to select the ULTIMATE EARS speaker
as the default playback device in the Windows Sound settings. Here’s how:
Open the Control Panel.
Select Hardware and Sound.
Under Sound, select Manage Audio Devices.
Select “Speakers Bluetooth Hands-Free Audio” and click Set Default.
Click OK.
Why won’t my Bluetooth device connect to my WONDERBOOM?
If your Bluetooth device won’t connect to your WONDERBOOM, try the following:
Make sure your speaker is turned on
Make sure your device is paired with your speaker and Bluetooth is active
Place your Bluetooth device closer to the speaker – it might be out of range
Move your Bluetooth device and speaker away from other wireless sources – you could
be experiencing interference
Turn your ULTIMATE EARS speaker off, and then back on again
If you have multiple ULTIMATE EARS speakers, make sure you’re connected to the
correct one
Your ULTIMATE EARS speaker can store up to 8 devices in memory and keep three
active connections (two for BOOM) devices at a time -- make sure you don’t already
have three devices connected
NOTE: If this is the first time you’re pairing a device with your speaker, you don’t need
to press the Bluetooth connection button. It comes out of the box ready to pair.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
