11 GB/CY
cable. Protect the cable from heat, oil
and sharp edges.
Only connect the connection cable to
the cigarette lighter socket in the car.
Follow the instructions of your automaker
on using the cigarette lighter socket.
If the cable is damaged, immediately
unplug from the cigarette lighter
socket.
The connection cable on this device
cannot be replaced. Dispose of the de-
vice if the cable is damaged.
Initial use
Place the product on a level, non-flammable surface. Do
not cover the vents. Do not operate the device in dusty
environments. Doing so poses a fire hazard and could
damage the device.
For inflatables with counterpressure (e.g. partly filled car
tyre): Switch on the product before connecting the con-
nection valve
7
to the tyre.
Note: Depending on the inflatable you can use the
connection valve
7
directly or along with the included
valve adapter
10
(see Fig. A).
Connecting to the cigarette lighter socket:
Note: Verify the socket of the cigarette lighter in your vehicle
has an adequately sized fuse.
Verify the product is switched off: on / off switch
6
to
position “0“.
Plug the cigarette lighter plug
5
into the socket of the
12 V cigarette lighter.
Connecting the connection valve
7
:
Open the connection valve
7
: clamping lever
8
vertical
(see Fig. B).
Connecting without valve adapter
10
:
To Next Page
Loading...
Need help?
General
