New Energy Co., Ltd www.ultisolar.com
E-mail : info@ultisolar.com Tel: 0086-0158-6679-7355
Add: 4102, Hanlin Yuan, Zhonggong Town, Licheng, Jinan, Shandong, China
III. K Value Setting
Press SET one time, the display will show K SETTING
Press SET for 5 seconds until the first number blinks, press + or – to input K value
After setting, press SET for 5 seconds to save and exit.
IV. Pressure Meter
1. Pressure meter and flow meter cannot work together.
2. To work as pressure meter, you have to choose AC to DC power adaptor for long time usage.
3. When use this as pressure meter, need to unplug the hall flow sensor power and provide
power to pressure sensor power plug.
V．Clear/Recover to factory setting
Open the back cover, there are two contacts besides the RESET print on the circuit board, short
circuit the two contacts when power on for 2 seconds, counting cleared.
To Previous Page
