Ultra Max UM-2100-762 - User Manual

With 762 Control
Water Conditioning Control System
Installation, Operation and Maintenance Manual
Good Water Warehouse Inc.
1700 E. Walnut Ave Fullerton, CA. 92831
TEL: (714) 441-2893 FAX: (714) 441-0525
Manufactured by:
Models:
UM-2100-762
UM-2150-762
UM-2200-762
SOFTENERS ARE NOT INTENDED TO BE USED FOR TREATING WATER THAT IS MICROBIOLOGICALLY UNSAFE
OR OF UNKNOWN QUALITY WITHOUT ADEQUATE DISINFECTION BEFORE OR AFTER THE SYSTEM.

Summary

Installer Quick-Start Guide

Initial Power-Up and Setup Procedures

Comprehensive guide covering initial power-up, valve selection, system size, time, day, regen time, salt amount, capacity, and hardness settings.

Resetting the Control

Equipment Installation

General Warnings and Safety Information

Important electrical and mechanical safety precautions for installation.

Site Selection and Connections

Electrical Connection

System Operation and Programming

742;762 Series Initial Setup and Configuration

Detailed step-by-step instructions for initial system setup and programming parameters.

Placing Conditioner into Operation

Final steps to start up the water conditioner after programming, including initial flushing.

Troubleshooting

700 Series Controller Error Codes

Common error codes displayed by the 700 series controller and their corresponding solutions.

System Operational Issues

Solutions for various system issues like brine tank overflow, improper regeneration, or flow problems.

Parts and Accessories

Ultra Max UM-2100-762 Specifications

General

Brand	Ultra Max
Model	UM-2100-762
Category	Control Systems
Language	English