Ultra Start 500 Series User Manual

500/550 SERIES
REV.2014.7.21
ADVANCED VEHICLE SECURITY SYSTEM
OWNER'S GUIDE
TM
FCC ID NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void the user’s authority to operate
this devise.
www.ultrastarters.com

Ultra Start 500 Series Specifications

General

Battery Voltage	12V
Battery Capacity	7Ah
Warranty	1 Year
Battery Type	Sealed Lead Acid (SLA)
Terminal Type	F1 Faston
Dimensions	151mm x 65mm x 94mm
Weight	2.3kg
Operating Temperature	-4°F to 122°F

Summary

Quick View (2way Remote)

Activate Panic Mode

Initiates the panic alarm sequence for safety.

Quick View (1way Remote)

Activate Panic

Initiates the panic alarm sequence.

Activates Trunk Release

Activates the vehicle's trunk release.

Arms/Locks and Turns Off Shock Sensor

Arms system and bypasses shock sensor.

Activate Panic Alarm

Initiates the panic alarm sequence.

Unlock/Disarm

Unlocks doors and disarms the security system.

Turns Off Siren But Alarm Still Armed

Silences siren while alarm remains armed.

Activates Trunk Release Output

Activates the vehicle's trunk release.

System Operations

Lock/Arm Alarm

Details on locking and arming the vehicle's security.

Unlock/Disarm Alarm

Details on unlocking and disarming the vehicle's security.

Driver's Priority Unlock

Explains unlocking the driver's door first.

Trunk Release

Instructions for activating the trunk release.

Panic Mode

Personal protection feature to attract attention.

Temporary Shock Bypass

Temporarily disables shock sensor.

Activating Anti Carjack Mode

Security feature to prevent unauthorized use.

Anti Carjack Alert

Details of the anti carjack alert sequence.

Anti Carjack Disarm

Procedures to disarm the anti carjack feature.

Service/Valet Mode

Disables security features for service.

Entering Service Mode

Steps to put the system into service mode.

Exiting Service Mode

Steps to take the system out of service mode.

LCD Functions

Transmitter Learning

How to program new remote transmitters.

Dual Car Operation (2way Remote)

How to use the remote for two vehicles.

Clock Adjustment

Steps to set or adjust the remote's clock.

LCD 2way Remote Transmitter Overview

Alarm Pager Function

How the remote displays alarm triggers.

Remote Programmable Features

Enter Program Mode

Steps to enter programming mode.

Select Car 1 or Car 2 Operation

Battery Replacement

1-Way Remote Transmitter Battery Replacement

Steps to replace batteries in 1-way remotes.

2-Way Remote Transmitter Battery Replacement

Steps to replace batteries in 2-way remotes.