Ultra Steel AP00973S User Manual

ULTRA STEEL
1 8
VOLT
Cordless Power Tool Combo Kit
INSTRUCTION MANUAL
4 PIECE
CAUTION: Before using this product, read this manual and follow all Safety Rules
and Operational Instructions.
Go to www.ultrasteeltools.com to register your product.
Please read before returning this product to store for any reason:
If you have questions or experience a problem with your Ultra Steel purchase,
go to http://www.ultrasteeltools.com for instant answers 24 hours a day.
If you can’t _nd the answer or don’t have internet access, call 1-800-840-
7856 from 8 a.m. to 5 p.m. Eastern time Monday through Friday
AP00973S
15
The RBRCTM Seal (Rechargeable Battery Recycling Corporation) on the
nickle-cadmium battery (or battery pack) indicates that the cost of
recycling the battery or battery pack have already been paid by Ultra
Steel. In some areas, it is illegal to place spent nickle-cadmium batteries in
the trash or municipal solid waste stream and the RBRC program provides an environ-
mentally conscious alternative.RBRC in cooperation with Ultra Steel and other battery
users, has established programs in the United States and Canada to facilitate the
collection of spent nickle-cadmium batteries. Help protect our environment and
conserve natural resources by contacting your local recycling center for information on
where to drop o_ the spent battery, or call 1-877-2-RECYCLE.
THE RBRC TM SEAL
FULL ONE YEA HOME USE WARRANTY
Ultra Steel warrants this product for one year against any defects in material or
workmanship. The defective product will be replaced or repaired at no charge in
either of two ways:
1) Return the product to the store in which it was purchased - this will result in an
exchange only.
Returns should be made within the time frame of the retailer’s policy for exchanges
(usually 30 to 90 days after the sale). Proof of purchase is required. Please check with
the store from which your purchase was made to determine policy regarding returns
that are beyond the time limit specied for exchanges.
2) Send the product to Ultra Steel for repair or replacement (whichever Ultra Steel
determines is the best option) and include your proof of purchase.
This warranty does not apply to accessories. This warranty gives you specic
legal rights and you may have other legal rights which vary from state to state
or province to province. For questions, call Ultra Steel at 1-800-840-7856.
This product is not intended for commercial use.
SERVICE INFORMATION:
For technical advice, repair, or genuine replacement parts,
call 1-800-840-7856 or visit www.UltraSteeltools.com
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are missing, call 1-800-840-7856 for free
replacement.
Ultra Steel is a registered trademark of and distributed by Test Rite Products
Corporation, 1900 S. Burgundy Place, Ontario, CA. 91761, U.S.A.,
Made in China

Ultra Steel AP00973S Specifications

General

Brand	Ultra Steel
Model	AP00973S
Category	Power Tool
Language	English

Summary

RBRC Recycling Program

RBRC Seal Explanation

Explains the RBRC seal indicating paid recycling costs for nickel-cadmium batteries.

One Year Home Use Warranty

Return to Store for Exchange

Product must be returned to store within retailer's policy for exchange only.

Send to Ultra Steel for Repair/Replacement

Send product to Ultra Steel for repair or replacement with proof of purchase.

Service and Support

Technical Support and Parts

Contact Ultra Steel for technical advice, repair, or genuine replacement parts.

Free Warning Label Replacement

Call 1-800-840-7856 for free replacement of missing or illegible warning labels.

Important Safety Instructions

General Safety Precautions

Follow basic safety precautions to reduce risk of fire, electric shock, and personal injury when using tools.

Battery and Charger Precautions

Follow precautions for charging, using, and handling batteries and chargers safely.

Product Specifications

Cordless Sander Specifications

Details on voltage, speed, pad size, and standards compliance for the cordless sander.

Cordless Drill Specifications

Specifications for the cordless drill including voltage, speed, chuck, torque clutch, and features.

Cordless Circular Saw Specifications

Specifications for the circular saw: voltage, speed, blade size, depth/bevel adjustments, and standards.

Cordless Flashlight Specifications

Specifications for the cordless flashlight: voltage, bulb type, and standards compliance.

Battery Charger Specifications

Details on charger input/output, charging time, and compatible battery types.

Included Accessories

List of accessories provided with the tool kit, including bits, blades, and storage case.

Battery Pack Operation

Battery Pack Charging and Handling

Instructions for charging, inserting, removing, and disposing of battery packs, including charging time.

Drill Operation

Variable Speed and Rotation Control

How to adjust speed using the trigger and control rotation direction with the forward/reverse switch.

Torque Regulator and Keyless Chuck

Using the torque regulator for screw driving and adjusting the keyless chuck for bits.

Circular Saw Operation

Circular Saw Safety

Safety warnings for the circular saw, including what to do if problems occur during operation.

Circular Saw Operation Details

Circular Saw Cutting Techniques

Proper techniques for pushing the saw, securing work, using rip fence, and adjusting depth for cuts.

Changing the Circular Saw Blade

Step-by-step guide for changing the saw blade using the included wrench and spindle lock.

Detail Sander Operation

Detail Sander Sandpaper Use

Instructions on attaching, using, and removing sandpaper on the detail sander for best results.

Worklight Operation

Worklight On/Off and Swivel Adjustment

How to turn the worklight on/off and adjust the swivel head for optimal positioning.

Tool Maintenance

General Maintenance Precautions

Warning to remove battery pack before maintenance, assembly, or adjustments for safety.

Tool Maintenance Details

Cleaning, Lubrication, and Repairs

Guidance on cleaning, lubrication, and stating that repairs should be done by authorized service centers.

Symbols Explained

Tool Safety and Operational Symbols

Explanation of symbols that may appear on the tool to ensure safer operation.

Parts List for Cordless Drill

Cordless Drill Components

Detailed list of components for the cordless drill with item numbers and quantities.

Parts List for Circular Saw

Circular Saw Components

Detailed list of components for the circular saw with item numbers, quantities, and units.

Parts List for Detail Sander

Detail Sander Components

Detailed list of components for the cordless detail sander with item numbers and quantities.

Parts List for Cordless Light

Cordless Light Components

Detailed list of components for the cordless light with item numbers and quantities.