Ultradent Valo User Manual

• F

  Felicia ScottJul 28, 2025

  What to do if Ultradent Valo light is not curing resins properly?

  

  Same questionReply

  • L

    luisyuJul 28, 2025

    If your Ultradent dental equipment light isn't curing resins properly, first examine the lens for any cured resins or composites. Then, using proper amber UV eye protection, verify that the LED lights are working. After that, check the power level with a light meter and confirm the expiration date on the curing resin. Finally, ensure you're following the manufacturer's recommendations for proper technique with the adhesive and composite.

    

    Reply
• M

  Marcia LopezAug 7, 2025

  How to fix Ultradent Dental equipment light that will not turn on?

  

  Same questionReply

  • P

    Paul MillerAug 7, 2025

    If your Ultradent dental equipment light will not turn on, try the following: First, press the Time/Mode Change Button or Power Button to wake the device from Power Save Mode. Next, check that both cords are firmly connected together and to the electrical outlet. Finally, confirm that there is power to the wall outlet.

    

    Reply
• J

  Jennifer HartAug 18, 2025

  Why Ultradent Dental equipment light does not stay on for desired time?

  

  Same questionReply

  • B

    Briana PerezAug 18, 2025

    If your Ultradent dental equipment light does not stay on for the desired time, check the Mode and Timing lights for the correct time input. Also, confirm that all cord connections are fully seated. If the issue persists, unplug and re-plug the power cord into the electrical receptacle.

    

    Reply

Ultradent Valo Specifications

General

Light Source	LED
Wavelength Range	395-480 nm
Power Output	3200 mW/cm²
Battery Type	Lithium Iron Phosphate
Weight	170 grams
Curing Modes	High Power, Xtra Power
Charging Time	2 hours
LEDs	Four LEDs

Summary

Product Description

Page: 2

Overview of Controls

Provides an overview of the VALO curing light's controls and their functions.

Indications for Use

Page: 2

Warnings and Precautions

Page: 2

Stepwise Instructions

Page: 4

Preparation and Setup

Instructions for powering on, connecting, and preparing the VALO curing light for use.

Operation and Modes

Details on using Standard, High, and Xtra Power modes, including timing, sleep mode, and basic operation.

Post-Use Procedures

Guidelines for device cleanup and mounting bracket installation after use.

Maintenance and Processing

Page: 6

Repair and Warranty

Information on product repair, warranty coverage, and user-performed maintenance recommendations.

Cleaning and Storage

Guidelines for acceptable cleaners, processing, and proper storage and disposal of the VALO curing light.

Technical Considerations

Page: 7

Accessories

Details on available accessories for the VALO curing light, such as barrier sleeves and light shields.

Technical Data and Wavelengths

Provides technical specifications, including effective composite curing wavelength bands and radiant flux.

Miscellaneous Information

Page: 8

Electromagnetic Emissions

Manufacturer's declaration concerning electromagnetic emissions compliance for the VALO device.

Electromagnetic Immunity

Manufacturer's declaration regarding electromagnetic immunity for non-life support systems.