To Next PageTo Next Page
Need help?Do you have a question about the Ultrak KAB Series and is the answer not in the manual?
Covers reading instructions, avoiding water/moisture, ensuring ventilation, proper power sources, grounding, lightning protection, and user servicing.
Details the unit's features including universal inputs, output zones, phantom power, priority, chime, external DC input, and telephone input.
Guidelines for installing the KAB series amplifier by qualified personnel, including rack mounting, voltage check, and connections.
Information on utilizing advanced features like connecting to an alternate power source (battery) during power failures.
Diagrams and instructions for connecting speakers to 8 Ohm, 25V, and High Impedance terminals using matching transformers.
Instructions for installing dipole or 75 Ohm coaxial antennas for FM reception, including optimal positioning.
Guidance on connecting indoor or outdoor AM antennas and the grounding cable for improved reception and noise reduction.
Detailed explanation of rear panel connection terminals including DC input, speaker zones, message E/M, antenna, remote control, and input jacks.
Covers Pack Unit connection, Direct Pre Out, Variable Amp In, Telephone In, Remote Chime, Music On Hold, and Speaker Terminals with impedance details.
Description of front panel elements like Power Switch, Master Volume, EQ, Channel Volumes, Chime/Siren switches, Zone Selector, and Level Display.
Explanation of rear panel controls such as Power Switch, Impedance Selector, and Channel 1 & 2 Priority/Phantom Power settings.
Basic guidelines for diagnosing problems like 'No Audio' or 'Audio, but no control' during installation.
Describes quarterly tasks like inspecting cabling, cleaning the unit, and verifying hardware security.
Details rated power, frequency response, THD, tone control, signal to noise ratio, and input levels for the KAB series amplifier.
Includes power source, dimensions, and weight for the KAB series amplifier models.
General