EasyManua.ls Logo

Ultraplast MD19 - User Manual

Ultraplast MD19
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENG User’s Manual for MD19 Roof Box
STANDARD LOCK
Dear customer,
We are so pleased and honoured by your decision to buy our roof box. We hope you will find this
box useful and joy to use. However, it is of high importance that you read carefully this user’s
manual before fitting the roof box and follow these instructions during the assembly operations.
BEFORE FIITING THE ROOF BOX
This ULTRAPLAST MD 19 roof box is good for all the standard roof racks with the rails of the
following size: width : max 95 mm
height : 15 - 40 mm
First of all, attach a roof rack to the roof (follow the assembly instructions of the respective
manufacturer). For perfect stability, the distance between the rack rails should be the longest
possible. When used on a 5-door car with the rear door opening upwards, place the roof rack
the way it is possible to freely open the rear (trunk) door.
FITTING THE ROOF BOX
The roof box is equipped with a fit-on system which allows for fast and easy assembly with no need
for any extra tools.
Place the roof box parallel onto the roof rack and attach the fitting elements (follow the figure
below). The anchoring straps must be placed under the plate between the supplied U-shaped
anchor arms.
1. roof rack
2. roof box
3. locking bracket / U- anchor
4. plate
5. locking bolt nut
6. anchoring strap/belt
Question and Answer IconNeed help?

Do you have a question about the Ultraplast MD19 and is the answer not in the manual?

Summary

Fitting the Roof Box

Before Fitting the Roof Box

Check roof rack compatibility and dimensions before attaching the roof box.

Roof Box Fitting Procedure

Steps to attach the roof box to the roof rack using the provided fitting elements.

Loading and Securing the Roof Box

Loading the Roof Box

Guidelines for loading luggage into the roof box, including weight limits.

Load Distribution Inside the Box

Recommended load distribution within the roof box for balanced weight.

Closing the Roof Box

Instructions on how to securely close and lock the roof box using its standard lock system.

Securing the Roof Box

How to engage the safety pin after closing the roof box for secure transport.

Operating the Roof Box

Opening and Disengaging the Roof Box

Steps to disengage the safety pin and unlock the roof box for opening.

Removing the Roof Box

Procedure to detach the roof box from the roof rack and remove it.

Important Safety Checks

Essential checks before trips and after driving to ensure box and rack security and safe travel.

Important Information

Speed and Maintenance Cautions

Maximum speed limits and recommended maintenance for the roof box.

Manufacturer Disclaimer

Manufacturer's liability regarding damage or accidents due to improper use or modification.

Ultraplast MD19 Specifications

General IconGeneral
BrandUltraplast
ModelMD19
CategoryAutomobile Accessories
LanguageEnglish