Need help?Do you have a question about the UltraPower UP120AC DUO and is the answer not in the manual?
General| Charge Power | 2 x 120W |
|---|---|
| Discharge Power | 2 x 10W |
| Charging Ports | 2 |
| Battery Types Supported | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| LiPo/LiFe/LiIon Cell Count | 1-6S |
| NiMH/NiCd Cell Count | 1-15S |
| Pb Voltage | 2-20V |
| Display | LCD |
| Charge Current | 0.1-10.0A |
| Discharge Current | 0.1-5.0A |
| Protection Features | Overcharge, Overcurrent, Short Circuit |
| Input Voltage | AC 100-240V / DC 11-18V |
Details safety precautions during the battery charging process.
Outlines safety considerations for the battery discharging process.
Explains AUTO function for automatic current setting and malfunction detection for safety.
Details monitoring and balancing of individual cells during discharging.
Explains delta-peak sensitivity for automatic charge termination.
Details balancing cell voltages during LiPo battery charging.
Explains the standard charging process for LiPo/LiFe/Lilon batteries.
Describes 'fast' charging mode for reduced charging time.
Details the charging process for Pb (lead-acid) batteries.
Details the discharging process for Pb (lead-acid) batteries.
Explains the standard charging process for NiMH/NiCD batteries.
To Next Page