To Next PageTo Next Page
Need help?Do you have a question about the Ultrasonic JYD-2700S and is the answer not in the manual?
Describes automatic and welding machine modes for operation, including specific mode functionalities.
Details core functionalities like automatic frequency tracking, digital control, and touch screen interface.
Specifies required temperature and humidity ranges for optimal generator performance and lifespan.
Highlights critical warnings regarding ventilation, avoiding corrosive environments, and proper usage.
Details the pin assignments and typical applications for the DB9 serial interface.
Explains the connections for the transducer, including positive and negative poles.
Describes the power input connector, voltage requirements, and fuse rating.
Explains the display elements and parameters for the automatic working mode.
Guides on how to use the automatic frequency search for optimal resonance.
Provides a step-by-step guide for setting up the generator for typical welding applications.
Troubleshooting steps for frequency lock errors during adjustment.
Guidance for resolving phase lock issues in the fine-tuning range.
Steps to diagnose and resolve errors related to exceeding rated power consumption.
Advice on addressing issues causing the generator to overheat.
Troubleshooting for IGBT overcurrent protection triggered by high power consumption.
Solutions for errors where load current exceeds set protection limits.
Steps to resolve errors caused by load voltage exceeding protection limits.
Guidance for core voltage errors, typically requiring contacting support.
General| Brand | Ultrasonic |
|---|---|
| Model | JYD-2700S |
| Category | Portable Generator |
| Language | English |
