Ultrasonix SonixOP - DICOM Print Settings

SonixOP User Manual 00.040.388, Revision F Chapter 8: System Setup
8-81
8.2.12.2 DICOM Print Settings
DICOM Print Settings offer basic and advanced settings for configuring the system for DICOM
Print.
To Configure DICOM Print Settings:
1. Press the console button.
2. Select Administrator > DICOM > Print.
3. An onscreen dialog with two (2) tabs will be presented: AE Configuration and Brightness/
Contrast.
4. Create/select a Device Name. Edit the Application Entity (AE) settings for the selected
Device.
5. Repeat step 4 as many times as required.
6. Configure AE Configuration and Brightness/Contrast as required.
Note: In addition to the two (2) tabbed settings options, select the Settings… button to
access Print Settings and Advanced Print Settings.