um Renegade Commando User Manual

II
 To remove Head light &
decoration cover, remove
lower nut-M8*1 No’s.
 Remove Handle assembly
carefully along with upper
triple clamp without
damaging any other part.
 Remove upper & lower
rubber dust seals from
shocker tube cover.
 Remove both side covers.
 Remove front brake caliper
assembly.
Bolt-M8*45
While assembling-
 Tightening torque-20~22
Nm
 Apply Loctite-412 before
fitting bolts.

um Renegade Commando Specifications

General

Brand	um
Model	Renegade Commando
Category	Motorcycle
Language	English