13. Do NOT touch the light bulb imme-
diately after the light is turned off. Be
aware of possible scalding!
14. The Tripod floor stand is NOT a chil-
drens toy and should not be used in
any other manner than described
above.
15. The minimum diameter of open area
(top & bottom) should NOT be less
than 100MM (4 inches); Lamp-to-
shade spacing must be over 3-1/4
inches (63.5mm); Lamp Centerline
Length must over 2-1/2 inches
(82.5mm).
16. The weight of lamp shade should
NOT exceed 1.1 KGS (2-1/2LBS).
NOTE: DO NOT try to repair the tripod
if the product, cable, socket or the lamp-
shade is in any way broken or not as
expected, such tasks are only intended
for qualified electricians!