12
Click on the Copy icon to open the window that contains the variables you are
adjusting.
Select the printer driver you want to use to print the copies, the type of image you
are scanning, the desired resolution, a scanning intensity level, and the size of the
scanned image, by clicking on the arrow to the right of each field.
Click the OK button to save the Copy push button configuration settings. These
settings will be used whenever you press the Copy button on the front of the
scanner.
Push the Copy button. The scanner will start scanning process and scan the
image to specified printer software.
Configuring the Custom buttons Values
1. Click on the VistaAccess icon
in the control strip with
one mouse click. A pop -up
menu as shown on the right
appears.
2. Click the Push button Configuration option. The push button
configuration window appears.
To Next Page
Loading...
Need help?
General
