6
configuration window appears.
3. Click the Copy icon to open the window that contains the variables
you are adjusting.
4. Select the printer driver you want to use to print the copies, the type
of image you are scanning, the desired resolution, a scanning intensity
level, original, the size for scanned image, by clicking on the arrow to
the right of each field.
5. Click the OK button to save the Copy push button configuration
settings. These settings will be used whenever you press the Copy
button on the front of the scanner.
6. Push the Copy button. The scanner will start scanning process
and scan the image to specified printer software you selected.
Configuring the Custom buttons
Values
1. Click the VistaAccess icon in
the Task bar using your right
mouse button. A pop -up menu
appears as the diagram shown to
the right.
2. Click the Push button
Configuration option. The push button configuration window appears.
To Next Page
Loading...
Need help?
General
